Glass

Using the background and reflections from lighting .

starting by hanging up the black back ground , i chose to use the black background as with the right lighting the subject can stand out clearly. I then set up the glass in the middle of the table and then had two hanging lights and

then started with using a soft box on one of the lights.
flash meter - After connecting the cable to the flash connection and setting the ASA to 100 and then changing the appature i then changed the mode to the lightening bolt with the c as this is used for working inside with flash.To which then could fire the tester flash which then determons if need more light or less light. For example the last 3 pictures had far too much light and needed the light to be decreased to which i did and the next pictures was a lot more balanced light wise.

The last 3 pictures the lighting is too strong in the right side of the picture and in order to balance the light even more i added two black carboard stands to block out and balance.